Announcements‎ > ‎

September 21st Meeting - Saw Mill Demo

posted Sep 3, 2013, 7:52 AM by Kent Riggins   [ updated Sep 3, 2013, 7:55 AM ]
We will meet 9 AM September 21 at 3960 Birdsville Road, Davidsonville, the home of CW member Joe Dickey. Fellow members Ted Rudie and Scott Burns will demonstrate their recently purchased Bandsaw Mill, Chain Saw Mill and home made solar kiln. Lunch orders will be taken for a local sandwich shop or members and guests may bring their own. Turning blanks will be made available at the conclusion of the demonstration. There is no charge for the meeting.

Attached is a flyer that Ted Rudie worked up with information about our meeting at Joe Dickey's farm on September 21st.


Ċ
Kent Riggins,
Sep 3, 2013, 7:52 AM
Comments